View LC150V01-SLA1_4462723.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 specification for approval 15.0 vga tft lcd title model general buyer *when you obtain standard approval, please use the above model name without suffix lc150v01 *model sla1 model lg.philips lcd co., ltd. supplier tv product engineering dept. lg. philips lcd co., ltd j.s.lee / engineer prepared by j.m.kim / manager reviewed by j.h.yoon / senior manager signature date approved by ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature date approved by www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 27 precautions 9 27 mounting precautions 9-1 27 operating precautions 9-2 28 electrostatic discharge control 9-3 28 precautions for strong light exposure 9-4 28 storage 9-5 28 handling precautions for protection film 9-6 15 9-12 interface connections 3-2 color input data reference 3-5 26 designation of lot mark 8-1 26 packing form 8-2 26 packing 8 25 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 6 electrical specifications 3 6-8 electrical characteristics 3-1 13 signal timing specifications 3-3 14 signal timing waveforms 3-4 16 power sequence 3-6 17-20 optical specifications 4 21-23 mechanical characteristics 5 24 reliability 6 25 international standards 7 25 safety 7-1 page item number contents www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 record of revisions preliminary specification dec,09,2005 0.0 description page revision date revision no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 1. general description lc150v01 is a color active matrix liquid crystal di splay with an integral cold cathode fluorescent lamp(ccfl) backlight system. the matrix employs a-s i thin film transistor as the active element. it is a transmissive type display operating in the n ormally black mode. it has a 15.0 inch diagonally measured a c t i v e d i s p l a y a r e a w i t h v g a r e s o l u t i o n ( 4 8 0 v e r t i c a l b y 6 4 0 h o r i zont a l p ix e l a r r a y) . each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical strip es. gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for e ach dot, thus, presenting a palette of more than 16,7m(true) colors. it has been designed to apply the 8bit 1 port lvds i nterface. it is intended to support lcd tv, pctv where high b rightness, super wide viewing angle, high color gamut, and high color depth are importan t. general features cn1 (20pin) (lvds 1port) v lcd +12.0v power circuit block source driver circuit tft - lcd panel (640 rgb 480 pixels) 1 1 640 480 back light assembly (6ccfl) cn2,5(3pin) timing controller (lvds rx integrated) gate driver circuit cn3,4(3pin) viewing angle free ( r/l 178(typ.), u/d 178(typ)) viewing angle (cr>10) 8bit, 16,7 m colors color depth 640 horiz. by 480 vert. pixels rgb strip arrangement pixel format 430 cd/m 2 (center 1 points typ.) luminance, white total 25.0 watt(typ.) (1.5w @ v lcd , 23.5w @ 430 cd/m 2 / lamp=7ma]) power consumption 2100 g (typ.) weight transmissive mode, normally black display operating mode hard coating(3h) & haze 25% treatment of the front polarizer surface treatment 0.4755mm x 0.4755mm pixel pitch 332.8(h) x 262.8 (v) x 22.0(d) mm (typ.) outline dimension 15.0 inches(38.040cm) diagonal (aspect ratio 4:3) active screen size www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 2. absolute maximum ratings the following items are maximum values which, if ex ceeded, may cause faulty operation or damage to the lcd module. table 1. absolute maximum ratings 1 1 1 c +50 0 t op 1 operating temperature unit %rh 90 10 h op operating ambient humidity %rh 90 10 h st storage humidity c +60 -20 t st storage temperature v dc +14.0 -0.3 v lcd power input voltage max min parameter note value symbol at 25 2 c note : 1. temperature and relative humidity range are show n in the figure below. wet bulb temperature should be 39 c max, and no condensation. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 3. electrical specifications 3-1. electrical characteristics it requires two power inputs. one is employed to po wer the lcd electronics and to drive the tft array and liquid crystal. the second input power for the ccfl , is typically generated by an inverter. the invert er is an external unit to the lcds. table 2_1. electrical characteristics note : 1. the specified current and power consumption are under the v lcd =12.0v, 25 c, f v =60hz condition whereas mosaic pattern(8 x 6) is displayed and f v is the frame frequency. 2. the current is specified at the maximum current pattern(vertical sub 1by1). 3. the duration of rush current is about 2ms and ri sing time of power input is 1ms(min.). 1 ma 144 125 - 1 watt 1.73 1.5 - p lcd power consumption 3 a 2 - - i rush rush current vdc 12.6 12.0 11.4 v lcd power supply input voltage 2 ma 221 170 - i lcd power supply input current module : parameter symbol max typ min notes unit values mosaic pattern(8 x 6) white : 255gray black : 0gray www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 table 2_2. electrical characteristics 6 watt 25.86 23.52 p bl power consumption 1, 5 min 3 ts discharge stabilization time at 0 c at 25 c v rms 1,130 4 khz 80 60 45 f bl operating frequency 1, 3 vs established starting voltage v rms 870 1, 2 v rms 655(3ma) 560(7ma) 550(7.5ma) v bl operating voltage 1 ma rms 7.5 7.0 3.0 i bl operating current lamp : 1, 7 hrs 50,000 life time parameter symbol max typ min notes unit values note : the design of the inverter must have specifi cations for the lamp in lcd assembly . the performance of the lamp in lcm, for example lif e time or brightness, is extremely influenced by the characteristics of the dc-ac inverter. so all t he parameters of an inverter should be carefully designed so as not to produce too much leakage curr ent from high-voltage output of the inverter. when you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker , etc) never occurs. when you confirm it, the lcdC assembly should be operated in the same condition a s installed in you instrument. do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to a conducting tape, tft-l cd module has a low luminance and the inverter has abnormal action. because leakage current is occ urred between lamp wire and conducting tape. 1. specified values are for a single lamp. 2. operating voltage is measured at 25 2 c. the variance of the voltage is 10%. 3. the voltage above v s should be applied to the lamps for more than 1 seco nd for start-up. (inverter open voltage must be more than lamp start ing voltage.) otherwise, the lamps may not be turned on. the used lamp current is the lamp typical current. 4. lamp frequency may produce interface with horizo ntal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in ord er to prevent interference. 5. lets define the brightness of the lamp after be ing lighted for 5 minutes as 100%. t s is the time required for the brightness of the cent er of the lamp to be not less than 95%. 6. the lamp power consumption shown above does not include loss of external inverter. the used lamp current is the lamp typical current. (p bl = v bl x i bl x n lamp ) 7. the life is determined as the time at which brig htness of the lamp is 50% compared to that of initia l value at the typical lamp current on condition of c ontinuous operating at 25 2 c. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 i p i -p * asymmetry rate: | i p C i Cp | / i rms x 100% * distortion rate i p (or i Cp ) / i rms 8. the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform (unsymmetrical ratio i s less than 10%). please do not use the inverter which has unsymmetrical voltage and unsymmetrical c urrent and spike wave. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp, a re following. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform shou ld be less than 10%. b. the distortion rate of the waveform should be wi thin 2 10%. * inverter output waveform had better be more simil ar to ideal sine wave. 9. the inverter which is combined with this lcm, is highly recommended to connect coupling(ballast) condenser at the high voltage output side. when you use the inverter which has not coupling(ballast) condenser, it may cause abnormal lamp lighting beca use of biased mercury as time goes. 10.in case of edgy type back light with over 4 para llel lamps, input current and voltage wave form sho uld be synchronized www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 3-2. interface connections table 3. module connector(cn1) pin configuration - lcd connector(cn1):df14h-20p-1.25h (manufactured b y hirose) or equivalent - mating connector : df14h-20s-1.25c (manufactured b y hirose) or equivalent note: 1. 20nd pin should be ground. 2. all gnd(ground) pins should be connected togethe r and to vss which should also be connected to the lcds metal frame. 3. all v lcd (power input) pins should be connected together. 4. input level of lvds signal is based on the iea 6 64 standard. 5. gnd : 1 frame inversion, +3.3v : 2 frame inversi on pin#37 lvds receiver signal(+) rxin3+ 18 note5 interlace image sticking option(on/off) mode 19 note 1 ground gnd 20 power supply +12.0v vlcd 2 power ground. gnd 3 power ground gnd 4 pin#48 lvds receiver signal(-) rxin0- 5 pin#47 lvds receiver signal(+) rxin0+ 6 ground gnd 7 pin#46 lvds receiver signal(-) rxin1- 8 pin#45 lvds receiver signal(+) rxin1+ 9 ground gnd 10 pin#42 lvds receiver signal(-) rxin2- 11 pin#41 lvds receiver signal(+) rxin2+ 12 ground gnd 13 pin#40 lvds receiver clock signal(-) rxclk in- 14 pin#39 lvds receiver clock signal(+) rxclk in+ 15 ground gnd 16 pin#38 lvds receiver signal(-) rxin3- 17 output pin # (lvds tx) description symbol pin no vlcd power supply +12.0v 1 20 1 rear view of lcm df14h-20p-1.25h(hirose or equ.) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 table 4. required signal assignment for lvds trans mitter (ds90c385 or compatible ) notes : 1. refer to lvds transmitter data sheet f or detail descriptions. 2. 7 means msb and 0 means lsb at r,g,b pixel data. rx1- rx1+ vertical sync signal vsync. txin25 28 data enable en txin26 30 rx2- rx2+ blue pixel data blue2 txin19 20 rx1- rx1+ blue pixel data blue1 txin18 19 blue pixel data blue7 [msb] txin17 18 rx3- rx3+ blue pixel data blue6 txin16 16 green pixel data green1 txin8 6 green pixel data green2 txin9 7 rx3- rx3+ green pixel data green6 txin10 8 green pixel data green7 [msb] txin11 10 rx1- rx1+ green pixel data green3 txin12 11 green pixel data green4 txin13 12 green pixel data green5 txin14 14 blue pixel data blue0 [lsb] txin15 15 blue pixel data blue3 txin20 22 blue pixel data blue4 txin21 23 blue pixel data blue5 txin22 24 rx3- rx3+ res txin23 25 rx2- rx2+ horizontal sync signal hsync. txin24 27 rx3- rx3+ red pixel data red6 txin27 50 green pixel data green0 [lsb] txin7 4 rx0- rx0+ red pixel data red5 txin6 3 rx3- rx3+ red pixel data red7 [msb] txin5 2 red pixel data red4 txin4 56 red pixel data red3 txin3 55 red pixel data red2 txin2 54 red pixel data red1 txin1 52 rx0- rx0+ red pixel data red0 [lsb] txin0 51 output description symbol pin name pin # www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 note : 1. the lcd module uses a 100ohm resistor bet ween positive and negative lines of each receiver in put. table 5. required signal assignment for lvds trans mitter (ds90c385 or compatible) red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ 51 52 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 27 28 30 31 ds90c385 or compatible 56 8 9 11 12 14 15 17 18 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 48 47 46 45 42 41 40 39 38 37 df14h-20p-1.25h timing controller lcd module www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 table 6. backlight connector pin configuration(cn2 ,cn3,cn4,cn5) notes: 1. the high voltage power terminal is co lored white,sky blue,and gray. 2. the low voltage pin color is white,dark blue,an d black . 1 power supply for lamp 6 (high voltage side), gray h6 3 1 power supply for lamp 5 (high voltage side), pink h5 2 1 power supply for lamp 4 (high voltage side), white h4 1 cn5 2 power supply for lamp 6 (low voltage side), black l6 3 2 power supply for lamp 5 (low voltage side), blue l5 2 2 power supply for lamp 4 (low voltage side), white l4 1 cn4 1 power supply for lamp 3 (high voltage side), gray h3 3 1 power supply for lamp 2 (high voltage side), pink h2 2 1 power supply for lamp 1(high voltage side), white h1 1 cn2 2 power supply for lamp 3 (low voltage side), black l3 3 2 power supply for lamp 2 (low voltage side), blue l2 2 2 power supply for lamp 1 (low voltage side), white l1 1 cn3 notes description symbol pin no the backlight interface connector is a model phr-3 (cn3/cn4) and bdbr-03(4.0)v-1s(cn2/cn5) manufactured by jst. the mating connector part num ber are s 3b-ph-kl (3pin), sm02(8.0)b-bdbs-1- tb(lf) (3pin) or equivalent. the pin configuration for the connector is shown in the table below. high back light unit cn2 cn4 cn5 cn3 high high low low low www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 3-3. signal timing specifications table 7. timing table note: 1. the performance of the electro-optical character istics are may be influenced by variance of the vertical refresh rates. 2. above timing table is only valid for de mode. 3. h sync ,v sync dont care.( for only de mode) this is the signal timing required at the input of the lvds transmitter. all of the interface signal timing should be satisfied with the following specifications for its proper operation. note 1) pal : 47~53hz ntsc : 57~63hz - 45 10 - vertical blank - 160 150 - horizontal blank thp tclk 480 480 480 tvv vertical valid hz 63 60 47 fv frequency tclk - 800 - thp total hsync thp - 525 520 tvp period vsync 640 640 640 thv horizontal valid de (data enable) mhz 35 25 22 frequency ns 28.6 40 33.3 tclk period dclk note unit max typ min symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 3-4. signal timing waveforms 0.7vcc 0.3vcc t clk invalid data valid data invalid data de(data enable) 0.5 vcc de(data enable) dclk de(data enable), data t ht t hv 640 t vv t vt 1 480 1 480 640 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 3-5. color data reference the brightness of each primary color(red,green,blue ) is based on the 8-bit gray scale data input for th e color; the higher the binary input, the brighter the color . the table below provides a reference for color ve rsus data input. table 8. color data reference note : users should be input true 8 bit data streams via lvds transmitter. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (000) dark green 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green (001) ... ... ... ... 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (000) dark red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (001) ... ... ... ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 red (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red (255) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (001) ... ... ... ... 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (254) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (255) blue (000) dark white yellow magenta cyan blue (255) green (255) red (255) black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 3-6. power sequence notes : 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd v lcd to 0v. 3. lamp power must be turn on after power supply fo r lcd an interface signal are valid. s - - 1 t7 ms 100 - - t6 ms 50 - 5 t2 ms ms - - 200 t3 - - 200 t4 ms 50 - 0.5 t5 ms 10 - 0.5 t1 max typ min units values parameter interface signal (tx) power for lamp power supply for lcd v lcd 10% 0v 90% 90% 10% t 1 t 2 t 5 t 6 t 7 t 3 t 4 10% 10% valid data lamp on table 9. power sequence www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 4. optical specification optical characteristics are determined after the un it has been on for approximately 30 minutes in a d ark environment at 25 2 c. the values specified are at an approximate dista nce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . fig. 1 presents additional information concerning t he measurement equipment and method. table 10. optical characteristics ta= 25 2 c , v lcd =12.0v, f v =60hz, dclk=65mhz, i lamp =7ma lcd module optical stage(x,y) pritchard 880 or equivalent 50cm 3 1.3 5p d white luminance variation 6 - gray scale y axis, down ( f =270 ) y axis, up ( f =90 ) x axis, left ( f =180 ) x axis, right( f =0 ) - 89 85 q d - 89 85 q u - 89 85 q l 5 degree - 89 85 q r viewing angle (cr>10) white blue green red 0.605 gy 0.284 gx 0.067 by 0.147 bx 0.293 wy 0.285 wx decay time rise time 4 ms 20 13 - tr d 0.343 ry typ +0.03 0.635 typ -0.03 rx color coordinates [cie1931] 4 ms 20 12 - tr r response time 2 cd/m 2 430 340 l wh surface luminance, white 1 notes units 700 450 cr contrast ratio max typ min values symbol parameter fig. 1 optical characteristic measurement equipment and method www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 notes 1. contrast ratio(cr) is defined mathematical ly as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels it is measured at center point(1) 2. surface luminance is luminance value at center point (1) across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 2. 3. the variation in surface luminance , d white is defined as : d white(5p) = maximum(l on1 ,l on2 , l on3 , ...... , l on5 ) / minimum(l on1 ,l on2 , l on3 , ..... , l on5 ) where l on1 to l on5 or l on13 are the luminance with all pixels displaying white at 5,13 locations . for more information see fig 2. 4. response time is the time required for the displ ay to transition from black to white(rise time, tr r ) and from white to black(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the ver tical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification gamma value is approximately 2.2. for more informat ion see table 11. . 86.7 l239 100 l255 35.4 l159 43.7 l175 53.0 l191 63.2 l207 16.0 l111 21.6 l127 28.0 l143 74.5 l223 2.42 l47 4.61 l63 7.59 l79 11.39 l95 0.97 l31 0.20 l15 0.14 l0 luminance [%] (typ) gray level table 11. gray scale specification www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 fig. 3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for black and white. white black measuring point for surface luminance & measuring point for luminance variation t r r t r d 100 90 10 0 optical response black fig. 2 measure point for luminance a : h / 4 mm b : v / 4 mm h : 304.32 mm v : 228.24 mm @ h,v : active area h a v b ? ? ? ? ? www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 fig. 4 viewing angle dimension of viewing angle range normal y e f q f = 0 , right f = 180 , left f = 270 , down f = 90 , up www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 5. mechanical characteristics the contents provide general mechanical characteris tics. in addition the figures in the next page are detailed mechanical drawing of the lcd. 228.24mm vertical hard coating(3h) anti-glare(25%) treatment of the f ront polarizer surface treatment 2,100g (typ.), 2,250g (max.) weight 232.2 mm vertical 262.8mm vertical 22.0 mm depth 304.32mm horizontal active display area 308.2 mm horizontal bezel area 332.8mm horizontal outline dimension notes : please refer to a mechanic drawing in terms of tolerance at the next page. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 6. reliability environment test condition wave form : random vibration level : 1.0g rms bandwidth : 10-500hz duration : x,y,z, 20 min one time each direction vibration test (non-operating) 5 0 - 10,000 feet(3048m) 0 - 40,000 feet(12,192m) altitude operating storage / shipment 7 shock level : 120g waveform : half sine wave, 2ms direction : x, y, z one time each direction shock test (non-operating) 6 ta= 0 c 240h low temperature operation test 4 ta= 50 c 50%rh 240h high temperature operation test 3 ta= -20 c 240h low temperature storage test 2 ta= 60 c 240h high temperature storage test 1 no test item condition www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 7. international standards 7-1. safety a) ul 60950-1:2003, first edition, underwriters lab oratories, inc., standard for safety of information technology equip ment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equip ment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardizat ion(cenelec) european standard for safety of information technol ogy equipment. 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r. limits and methods of measurement of radio interface characteristics of information technology equipment. international special committ ee on radio interference. c) en 55022 limits and methods of measurement of r adio interface characteristics of information technology equipment. european committee for electr otechnical standardization.(cenelec), 1998 ( including a1: 2000 ) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 8-2. packing form a) package quantity in one box : 8 pcs b) box size : 315mm 350mm 385mm 8. packing 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f : factory code g : assembly code h ~ m : serial no. note 1. year 2. month 4. serial no. mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan 3. factory code c lpl nanjing d heesung mark factory code k lpl gumi b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. mark 100001~199999, 200001~299999, 300001~399999, ., a0 0001~a99999, .., z00001~z99999 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 27 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. (7) please do not give any mechanical and/or acoust ical impact to lcm. otherwise, lcm can not be operated its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw (if not, it causes metallic fore ign material and deal lcm a fatal blow) (9) please do not set lcd on its edge. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 28 / 28 lc150v01 liquid crystal display ver. 0.0 dec. 09, 2005 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. 9-5. storage 9-6. handling precautions for protection film (1) the protection film is attached to the bezel w ith a small masking tape . when the protection film is peeled off, static elec tricity is generated between the film and polarizer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue r emains on the bezel surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. www.datasheet.net/ datasheet pdf - http://www..co.kr/
www.datasheet.net/ datasheet pdf - http://www..co.kr/
error: syntaxerror offending command: --nostringval-- stack: / title ( ) / subject ( d:20100430141450+08'00' ) / moddate ( ) / keywords ( pdfcreator version 0.9.5 ) / creator ( d:20100430141450+08'00' ) / creationdate ( user ) / author -mark- www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LC150V01-SLA1

	To Download LC150V01-SLA1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .